SYENSQO PSU UDEL P-1720 (P1720) NT13 polysulfone

SYENSQO PSU UDEL P-1720 (P1720) NT13 polysulfone

SYENSQO Udel® P-1700 polysulfone (PSU) is a tough, rigid, high-strength thermoplastics suitable for continuous use up to 300°F (149°C). It is resistant to oxidation and hydrolysis and withstand prolonged exposure to high temperatures and repeated sterilization. Udel® P-1700 polysulfone is highly resistant to mineral acids, alkali and salt solutions. Resistance to detergents and hydrocarbon oils is good, but the resin may be attacked by polar solvents such as ketones, chlorinated hydrocarbons and aromatic hydrocarbons.

These resins are also highly resistant to degradation by gamma or electron beam radiation. Electrical properties of Udel® P-1700 polysulfones are stable over a wide temperature range and after immersion in water or exposure to high humidity.

The resins comply with FDA 21 CFR 177.1655 and may be used in articles intended for repeated use in contact with foods. Additionally, they are approved by the NSF, by the Department of Agriculture for contact with meat and poultry and by the 3-A Sanitary Standards of the Dairy Association.
Transparent: Udel® P-1700 CL 2611 CMP
Transparent: Udel® P-1700 CL 2611 CMP MR
Transparent: Udel® P-1700 NT 06
Transparent: Udel® P-1700 NT 11
Transparent: Udel® P-1700 NT 11 MR
Opaque Black : Udel® P-1700 BK 937
Opaque White: Udel® P-1700 WH 6417
Opaque White: Udel® P-1700 WH 7407
Opaque Gray: Udel® P-1700 GY 8057

Generic Name: Polysulfone (PSU) - Supplied by: Syensqo
Udel P-1720 by Syensqo is a hydrolytically stable, colorable, biocompatible polysulfone (PSU). It possesses good surface finish, toughness, strength, high rigidity and good dimensional stability. This grade exhibits good chemical-, acid-, alcohol-, alkali-, hydrocarbon-, detergent and high heat resistance. Udel® P-1720 shows creep-, steam and radiation (gamma) resistance. It offers good sterilizability to autoclave, electron beam, ethylene oxide, heat, steam and radiation. Provides stable electrical properties over a wide temperature range and after immersion in water or exposure to high humidity. This grade can be processed by blow molding-, pipe-, sheet-, film & profile extrusion, injection blow molding, thermoforming and machining. It is recommended for appliances & appliance components, microwave cookware, automotive electronics and food service applications. Can also be used in electrical parts, electronic applications, industrial parts and plumbing parts such as fittings, valves or valve parts. Further applications include dental, medical/ healthcare such as medical devices, surgical instruments and hospital goods. Complies with FDA 21 CFR 177.1655 and RoHS. Udel® P-1720 meets with the requirements of ISO 10993, ISO 10993 Part 1, NSF 61 (tested at 82°C, commercial hot) and NSF 51 (max. temperature of use 149°C).